Photoelectric
M18 Through-beam · 5 m
PNP · NO

5 mCable
Separate M18 transmitter and receiver form a 5 m through-beam sensing pair. Mount them facing each other, align the beam and check interruption by the smallest target.
| Sensing01 | |
|---|---|
| Technology | Through-beam |
| Manufacturer | Dolphin |
| Housing / form | M18 |
| Sensing range | 5 m |
| Electrical02 | |
| Operating voltage | 10–35 VDC |
| Output circuit | NPN |
| Switching function | NO+NC |
| Maximum load current | 300 mA |
| Mechanical03 | |
| Connection | Cable |
| Wire count | 4 |
| Wiring notes | Transmitter: 2 power wires; receiver: 4 wires, NPN sinking NO+NC output. Confirm pin assignments before connection. |
| Cable length | 2 m |
| Mounting | NON flush |
| Housing material | Nickel-plated metal |
| Dimensions / length | 65 mm |
| Dimensional reference04 | |
| Body diameter | 18 mm |
| Housing length (excluding tip) | 65 mm |
Based on Dolphin’s supplied product information. Confirm the exact orderable configuration with the team.
Manufacturer documentation is not attached. Request the exact wiring and dimensional reference before installation.
Start with your target and installation to compare suitable configurations.